Apogee Instruments, Inc.: New Products - Accessories

AM-261 Complete Detector Mounting Assembly

Fri, 31 Jan 2025 15:27:13 +0000

This mounting assembly contains all the hardware necessary to mount Apogee's Radiation Frost Detector or He..

AM-340 Handheld Rod and microCache Mount

Wed, 29 Jan 2025 13:43:08 +0000

The AM-340 is a versatile handle designed for handheld and portable sensor use. It can mount a sensor rod (such as the AM-130 or

The AY-002 allows you to connect the 2 sensors from our NDVI Sensors to the Apogee microCache data logger. To create a functional/logging NDVI sensor you also need an upward facing NDVI sensor, a

The AM-501 mounting fixture accommodates any Apogee mounting rod (e.g., net radiometer comes with a rod). This stainless steel mounting accessory can be mounted to a vertical or horizontal mast or pipe. It has 3 leveling screws that can be adjusted to level the sensor after tightening the..

Price: $163.77

AC-110: Communication Adapter

Mon, 08 Jul 2024 13:22:33 +0000

AC-110 COMMUNICATION ADAPTER - The AC-110 adapter is required to download data from an Apogee handheld meter to a computer. It converts the meter’s output into a signal that can be read by a computer via USB-C. A USB-A to USB-C cable is included, so it's ready to con..

Price: $46.34

AM-330 Telescopic Water Submersible Sensor Wand

Tue, 07 May 2024 10:41:15 +0000

AM-330 UNDERWATER SENSOR WAND - This underwater, telescopic wand allows users to measure photosynthetically active radiation (PAR) in hard-to-reach places, such as over plant canopies, aquariums, and deep in the corners of growth chambers. The extendable wand can be used o..

Price: $51.49

TA-001 Shield Adapter for HMP155 Temperature Probe

Tue, 30 Jan 2024 16:12:13 +0000

The TA-001 adapter works with the HMP155 temperature probe and Apogee TS-100/TS-200 series aspirated radiation shields.

The TA-001 package includes the shield plug and protective tube. The HMP155 temperature probe is not included and must be purchased separately.

The AM-270 Guardian mounting bracket is designed to accommodate the Guardian models SM-500 and

The AM-150 Albedometer Solar Panel clamping bracket is designed to accommodate the SP-722-SS modbus albedometer. It can also be used to mount other upward and downward facing sensors, such as our thermopile pyranometers and pyrgeometers using the AM-130, or NDVI sensors using the

Sick and tired of running out of cable length between your sensor and logging device? We've got you covered.

Extension cables allow you to place your sensor farther away from your logging device. They are microCache (AT-100) compatible and feature a male connector on one end and a femal..

Price: $215.27