SQ-645-SS 0-5 V output Quantum Light Pollution Sensor

$460.00

The SQ-645 Quantum Light Pollution is an amplified sensor with a 0 to 5 V output. The sensor features a rugged, aluminum housing that is fully-submersible and built to withstand harsh conditions, and high-quality cable terminating in pre-tinned pigtail leads for easy connection to dataloggers and controllers. The sensor cable includes an IP68 marine-grade stainless-steel cable connector to simplify sensor removal and replacement from permanent installations for maintenance and calibration. Typical applications of Quantum Light Pollution sensors include incoming PFD measurements over plant canopies in indoor greenhouses or in growth chambers, and reflected or under-canopy (transmitted) PFD measurements in the same environments. 

The analog version of this sensor (SQ-640) comes with the inline cable connector placed 30 cm from the sensor head for either standard use as a long-cable pigtail sensor, or for use with our microCache Bluetooth Micro Logger by unscrewing the connector, discarding the long section of cable and then screwing the sensor to the mating connector on the microCache.

 

FOR MORE PRODUCT INFORMATION, CHECK OUT THESE LINKS

 

MORE INFORMATION ON APOGEE QUANTUM LIGHT POLLUTION SENSORS >> click here

 

How is the SQ-645 different from previous Apogee quantum sensors?

The SQ-645 is an extended range photon flux density (PFD) 0 to 5 V sensor with a spectral range of 340 to 1040 nm ± 5 nm, which can be seen in the graph below. 
SQ-620 Spectral Response
Where is the SQ-645 used?

Many plants are affected by interruptions in dark periods even by extremely dim light. Apogee’s new Quantum Light Pollution Sensor is designed to detect photons from 340-1040 nm that are below the sensitivity level of a typical quantum sensor. Detecting stray photons that disrupt the night is critical in preventing negative effects in plants such as hermaphrodism and stunted growth.
Full Description
This product is on backorder until 7th Dec 2020
Where to Buy

The SQ-645 Quantum Light Pollution is an amplified sensor with a 0 to 5 V output. The sensor features a rugged, aluminum housing that is fully-submersible and built to withstand harsh conditions, and high-quality cable terminating in pre-tinned pigtail leads for easy connection to dataloggers and controllers. The sensor cable includes an IP68 marine-grade stainless-steel cable connector to simplify sensor removal and replacement from permanent installations for maintenance and calibration. Typical applications of Quantum Light Pollution sensors include incoming PFD measurements over plant canopies in indoor greenhouses or in growth chambers, and reflected or under-canopy (transmitted) PFD measurements in the same environments. 

The analog version of this sensor (SQ-640) comes with the inline cable connector placed 30 cm from the sensor head for either standard use as a long-cable pigtail sensor, or for use with our microCache Bluetooth Micro Logger by unscrewing the connector, discarding the long section of cable and then screwing the sensor to the mating connector on the microCache.

 

FOR MORE PRODUCT INFORMATION, CHECK OUT THESE LINKS

 

MORE INFORMATION ON APOGEE QUANTUM LIGHT POLLUTION SENSORS >> click here

 

How is the SQ-645 different from previous Apogee quantum sensors?

The SQ-645 is an extended range photon flux density (PFD) 0 to 5 V sensor with a spectral range of 340 to 1040 nm ± 5 nm, which can be seen in the graph below. 
SQ-620 Spectral Response
Where is the SQ-645 used?

Many plants are affected by interruptions in dark periods even by extremely dim light. Apogee’s new Quantum Light Pollution Sensor is designed to detect photons from 340-1040 nm that are below the sensitivity level of a typical quantum sensor. Detecting stray photons that disrupt the night is critical in preventing negative effects in plants such as hermaphrodism and stunted growth.
Current Stock:
Power Supply 5.5 to 24 V DC Current Draw 12 V is 57 µA Sensitivity 25 mV per µmol mˉ² sˉ¹ Calibration Factor 0.04 µmol mˉ² sˉ¹ mV per Calibration Uncertainty ± 5 % Output Range 0 to 5 V Measurement Range 0 to 200 µmol mˉ² sˉ¹ Measurement Repeatability Less than 0.5 % Long-term Drift (Non-stability) Less than 2 % per year Non-linearity Less than 1 % (up to 400 µmol mˉ² sˉ¹) Response Time Less than 1 ms Field of View 180˚ Spectral Range 340 to 1040 nm ± 5 nm (wavelengths where response is greater than 50 %) Directional (Cosine) Response ± 2 % at 45°, ± 5 % at 75° zenith angle Azimuth Error Less than 0.5 % Tilt Error Less than 0.5 % Temperature Response -0.11 ± 0.04 % per C Uncertainty in Daily Total Less than 5 % Housing Anodized aluminum body with acrylic diffuser IP Rating IP68 Operating Environment -40 to 70 C; 0 to 100 % relative humidity; can be submerged in water up to depths of 30 m Dimensions 30.5 mm diameter, 37 mm height Mass (with 5 m of cable) 140 g Cable 5 m of two conductor, shielded, twisted-pair wire; TPR jacket; pigtail lead wires; stainless steel (316), M8 connector Warranty 4 years against defects in materials and workmanship
Release Date: This product is on backorder until 7th Dec 2020