MU-200: UV Separate Sensor with Handheld Meter

$398.00

The MU-200 has a hand-held meter, attached via cable, that displays and stores measurements. The sensor incorporates a photodiode that measures combined UVA and UVB radiation. Typical applications include UV radiation measurement in outdoor environments (sensor is not recommended for long-term continuous outdoor deployment), laboratory use with artificial light sources (e.g., germicidal lamps), and monitoring the filter ability and stability of various materials.

The meter has a sample and log mode, and will record an integrated daily total in mol m-2 d-1. Sample mode will record up to 99 manual measurements. Log mode will power the meter on/off to make a measurement every 30 seconds. Every 30 minutes the meter will average the sixty 30 second measurements and record the averaged value to memory. The meter can store up to 99 averages, once full it will start to overwrite the oldest measurement with new ones. An integrated daily total will be recorded from the 48 averaged measurements (making a 24 hr period). Sample and log measurements can be reviewed on the LCD display or by downloading the data to a computer, however, the integrated daily total can only be viewed by downloading the data to a computer. Downloading data to a computer requires the AC-100 communication cable (a standard USB cable will not work) and ApogeeAMS software.

Full Description
Want to add on a protective carrying case?
Where to Buy

The MU-200 has a hand-held meter, attached via cable, that displays and stores measurements. The sensor incorporates a photodiode that measures combined UVA and UVB radiation. Typical applications include UV radiation measurement in outdoor environments (sensor is not recommended for long-term continuous outdoor deployment), laboratory use with artificial light sources (e.g., germicidal lamps), and monitoring the filter ability and stability of various materials.

The meter has a sample and log mode, and will record an integrated daily total in mol m-2 d-1. Sample mode will record up to 99 manual measurements. Log mode will power the meter on/off to make a measurement every 30 seconds. Every 30 minutes the meter will average the sixty 30 second measurements and record the averaged value to memory. The meter can store up to 99 averages, once full it will start to overwrite the oldest measurement with new ones. An integrated daily total will be recorded from the 48 averaged measurements (making a 24 hr period). Sample and log measurements can be reviewed on the LCD display or by downloading the data to a computer, however, the integrated daily total can only be viewed by downloading the data to a computer. Downloading data to a computer requires the AC-100 communication cable (a standard USB cable will not work) and ApogeeAMS software.

We are currently looking for case studies for this product. If you would like to share your application of this product, please click here.

Current Stock:
Calibration Uncertainty ± 10 % Measurement Repeatability Less than 1 % Non-stability (Long-term Drift) Less than 3 % per year Non-linearity Less than 1 % (up to 300 µmol mˉ² sˉ¹) Response Time Less than 1 ms Field of View 180 ˚ Spectral Range 250 to 400 nm Directional (Cosine) Response ± 10 % at 75 ˚ zenith angle Temperature Response Approximately 0.1 % per C Operating Environment 0 to 50 C, less than 90 % non-condensing relative humidity up to 30 C, less than 70 % non-condensing relative humidity from 30 to 50 C Meter Dimensions 12 mm length, 70 mm width, 24 mm height Sensor Dimensions 24 mm diameter, 28 mm height Mass 180 g Cable 2 m of shielded, twisted-pair wire with santoprene rubber jacket (high water resistance, high UV stability, flexibility in cold conditions), additional cable available Warranty 4 years against defects in materials and workmanship