1. Home
  2. / Photometric Sensor
  3. / Photometric Sensor Support
  4. / SE-100-SS 0-150000 lux Photometric Sensor
SE-100-SS 0-150000 lux Photometric Sensor Click here to enlarge
SE-100-SS 0-150000 lux Photometric Sensor Click here to enlarge
SE-100-SS 0-150000 lux Photometric Sensor Click here to enlarge
SE-100-SS 0-150000 lux Photometric Sensor Click here to enlarge
SE-100-SS 0-150000 lux Photometric Sensor Click here to enlarge
SE-100-SS 0-150000 lux Photometric Sensor Click here to enlarge
SE-100-SS 0-150000 lux Photometric Sensor SE-100-SS 0-150000 lux Photometric Sensor SE-100-SS 0-150000 lux Photometric Sensor SE-100-SS 0-150000 lux Photometric Sensor SE-100-SS 0-150000 lux Photometric Sensor SE-100-SS 0-150000 lux Photometric Sensor

SE-100-SS 0-150000 lux Photometric Sensor

$349.17

The SE-100-SS Photometric sensor is a self-powered lux sensor with a range of 0-150000 lux over a 0 to 200 mV range. The sensor features a rugged, aluminum housing that is fully-submersible and is built to withstand harsh conditions, and high-quality cable terminating in pre-tinned pigtail leads for easy connection to dataloggers and controllers. The sensor cable includes an IP68 marine-grade stainless-steel cable connector to simplify sensor removal and replacement from permanent installations for maintenance and calibration. Typical applications of photometric sensors include measuring light levels for human vision in offices, sports arenas, hospitals, museums and more.

Photometric sensors are not going to be available to ship until mid June, 2026. You may still place orders, but expect the delay. Thank you for your understanding. 

FOR MORE PRODUCT INFORMATION, CHECK OUT THESE LINKS

• Product Manual

• Specification Sheet

• Technical Drawing

 

 

Full Description
Where to Buy

The SE-100-SS Photometric sensor is a self-powered lux sensor with a range of 0-150000 lux over a 0 to 200 mV range. The sensor features a rugged, aluminum housing that is fully-submersible and is built to withstand harsh conditions, and high-quality cable terminating in pre-tinned pigtail leads for easy connection to dataloggers and controllers. The sensor cable includes an IP68 marine-grade stainless-steel cable connector to simplify sensor removal and replacement from permanent installations for maintenance and calibration. Typical applications of photometric sensors include measuring light levels for human vision in offices, sports arenas, hospitals, museums and more.

Photometric sensors are not going to be available to ship until mid June, 2026. You may still place orders, but expect the delay. Thank you for your understanding. 

FOR MORE PRODUCT INFORMATION, CHECK OUT THESE LINKS

• Product Manual

• Specification Sheet

• Technical Drawing

 

 

Current Stock:
Output (sensitivity) 0.001 mV per lux Calibration Factor (Reciprocal of Sensitivity) 1000 lux per mV Calibration Uncertainty ± 5 % Output Range 0 to 200 mV Measurement Range 0 to 150000 lux Measurement Repeatability Less than 0.5 % Long-term Drift (Non-stability) Less than 2 % per year Non-linearity Less than 1 % Response Time Less than 1 ms Field of View 180˚ Spectral Range CIE 1931 luminous efficiency function Directional (Cosine) Response ± 2 % at 45˚; ± 5 % at 75˚ Temperature Response Less than 0.1 % per C Operating Environment -40 to 70 C; 0 to 100 % relative humidity Dimensions 30.5 mm diameter, 37 mm height Mass (with 5 m of cable) 140 g Cable 5 m of shielded, twisted-pair wire; TPR jacket (high water resistance, high UV stability, flexibility in cold conditions); pigtail lead wires; stainless steel (316), M8 connector located 25 cm from sensor head Warranty 4 years against defects in materials and workmanship Manufactured Assembled in the USA

Related Products