SP-420 Smart Pyranometer | USB Output

$267.00

The new SP-420 smart pyranometer can be connected directly to a computer for taking spot measurements or graphing and datalogging real-time shortwave radiation using the included software. The sensor can also act as a stand-alone shortwave radiation datalogger by simply connecting it to most standard 5 V DC USB power sources. Internal memory within the sensor head is capable of storing 10,000 user-specified periodic measurements that can be downloaded as a csv file to a computer for analysis.

Internal Data Storage
The sensor has internal data storage capability with the ability to hold up to 10,000 measurements. This allows the sensor to collect data while connected to a stand-alone 5 V DC power supply such as a USB wall adapter.

No Datalogger Required
The sensor can be connected to a desktop or laptop computer via USB 2.0 type A plug, to be used with the ApogeeConnect software (Windows compatible, XP and later; Mac compatible, 10.10 and later). The included Apogee software gives the user control of data logging and calibration settings, provides a real time output display and graph of shortwave radiation measurements and allows the data set to be saved as a csv file.

Click here for more information on ApogeeConnect software for USB sensors.

 

FOR MORE PRODUCT INFORMATION, CHECK OUT THESE LINKS

• Product Manual

• Specification Sheet

• Technical Drawing

 

MORE INFORMATION ON APOGEE PYRANOMETERS >> click here

 

 

Full Description
Where to Buy

The new SP-420 smart pyranometer can be connected directly to a computer for taking spot measurements or graphing and datalogging real-time shortwave radiation using the included software. The sensor can also act as a stand-alone shortwave radiation datalogger by simply connecting it to most standard 5 V DC USB power sources. Internal memory within the sensor head is capable of storing 10,000 user-specified periodic measurements that can be downloaded as a csv file to a computer for analysis.

Internal Data Storage
The sensor has internal data storage capability with the ability to hold up to 10,000 measurements. This allows the sensor to collect data while connected to a stand-alone 5 V DC power supply such as a USB wall adapter.

No Datalogger Required
The sensor can be connected to a desktop or laptop computer via USB 2.0 type A plug, to be used with the ApogeeConnect software (Windows compatible, XP and later; Mac compatible, 10.10 and later). The included Apogee software gives the user control of data logging and calibration settings, provides a real time output display and graph of shortwave radiation measurements and allows the data set to be saved as a csv file.

Click here for more information on ApogeeConnect software for USB sensors.

 

FOR MORE PRODUCT INFORMATION, CHECK OUT THESE LINKS

• Product Manual

• Specification Sheet

• Technical Drawing

 

MORE INFORMATION ON APOGEE PYRANOMETERS >> click here

 

 

Current Stock:
ISO 9060:2018 Class C (previously known as second class) Resolution 0.1 W mˉ² Calibration Factor Custom for each sensor and stored in firmware Calibration Uncertainty ± 5 % Measurement Repeatability Less than 1 % Non-stability (Long-term Drift) Less than 2 % per year Non-linearity Less than 1 % (up to 1750 W mˉ²) Response Time Software updates every second Field of View 180˚ Spectral Range 360 to 1120 nm (wavelengths where response is 10 % of maximum) Directional (Cosine) Response ± 5 % at 75˚ zenith angle Temperature Response 0.04 ± 0.4 % per C Operating Environment -40 to 70 C; 0 to 100 % relative humidity; can be submerged in water up to depths of 30 m Dimensions 24 mm diameter, 33 mm height Mass Sensor head weighs 90 g USB Cable 4.5 m (15 ft) Current Draw 61 mA Warranty 4 years against defects in materials and workmanship