SP-710-SS: Albedometer Sensor Package

$663.00

This promotional package includes a SP-510-SS thermopile pyranometer (upward-looking), a SP-610-SS thermopile pyranometer (downward-looking), an AY-001 differential splitter, and an AW-605-SS 5 meter cable. 

Apogee Instruments SP-510 and SP-610 pyranometers consist of a thermopile detector, acrylic diffuser (SP-510) or glass window (SP-610), heater, and signal processing circuitry mounted in an anodized aluminum housing. For mounting to a mast or directly to a solar panel, we recommend using either the AL-130 Albedometer mounting bracket or the AM-500 Net Radiometer mounting bracket paired with an AM-130 mounting fixture with 12" rod.

Albedo measurements indicate the broadband shortwave reflectivity of materials and are used to monitor bifacial solar panels, understand heat retention in urban and architectural settings, and study climate and weather. Typical applications for pyranometers include shortwave radiation measurement in agricultural, ecological, and hydrological weather networks.

The SP-710-SS includes in-line IP68 marine-grade stainless-steel cable connectors placed 30 cm from the sensor heads for either standard use as a long-cable pigtail sensor, or for use with our microCache Bluetooth Micro Logger. To connect both sensors to the microCache for dual measurements, use the AY-001 differential splitter.

 

FOR MORE PRODUCT INFORMATION, CHECK OUT THESE LINKS

• Product Manual

• Specification Sheet

• Technical Drawing

 

MORE INFORMATION ON APOGEE PYRANOMETERS >> click here

Full Description
Where to Buy

This promotional package includes a SP-510-SS thermopile pyranometer (upward-looking), a SP-610-SS thermopile pyranometer (downward-looking), an AY-001 differential splitter, and an AW-605-SS 5 meter cable. 

Apogee Instruments SP-510 and SP-610 pyranometers consist of a thermopile detector, acrylic diffuser (SP-510) or glass window (SP-610), heater, and signal processing circuitry mounted in an anodized aluminum housing. For mounting to a mast or directly to a solar panel, we recommend using either the AL-130 Albedometer mounting bracket or the AM-500 Net Radiometer mounting bracket paired with an AM-130 mounting fixture with 12" rod.

Albedo measurements indicate the broadband shortwave reflectivity of materials and are used to monitor bifacial solar panels, understand heat retention in urban and architectural settings, and study climate and weather. Typical applications for pyranometers include shortwave radiation measurement in agricultural, ecological, and hydrological weather networks.

The SP-710-SS includes in-line IP68 marine-grade stainless-steel cable connectors placed 30 cm from the sensor heads for either standard use as a long-cable pigtail sensor, or for use with our microCache Bluetooth Micro Logger. To connect both sensors to the microCache for dual measurements, use the AY-001 differential splitter.

 

FOR MORE PRODUCT INFORMATION, CHECK OUT THESE LINKS

• Product Manual

• Specification Sheet

• Technical Drawing

 

MORE INFORMATION ON APOGEE PYRANOMETERS >> click here

Current Stock:
ISO 9060:2018 Class C (previously known as second class) Power Supply Self powered Calibration Uncertainty at 1000 W mˉ² Less than 3 % Measurement Range 0 to 2000 W mˉ² (net shortwave irradiance) Measurement Repeatability Less than 1 % Long-term Drift Less than 2 % per year Non-linearity Less than 1 % Detector Response Time 0.5 seconds Temperature Response Less than 5 % from -15 to 45 C Zero Offset A Less than 2 W mˉ², Less than 10 W mˉ² (heated) (upward-looking); Less than 1 W mˉ², Less than 5 W mˉ² (heated) (downward-looking) Zero Offset B Less than 5 W mˉ² Operating Environment -50 to 80 C, 0 to 100 % relative humidity Uncertainty in Daily Total Less than 5 % Dimensions 28.7 mm height, 23.5 mm diameter Warranty 4 years against defects in materials and workmanship Manufactured Assembled in the USA