SQ-422-SS Modbus Digital Output Quantum Sensor

$284.00

The SQ-422 sensor outputs a digital signal using Modbus RTU protocol over RS-232 and RS-485. The sensor is calibrated for sunlight and electric lights, selectable through Modbus commands, and has a command that automatically applies the immersion effect correction factor for underwater measurements. The sensor features a rugged, self-cleaning sensor housing design, and high-quality cable terminating in pre-tinned pigtail leads for easy connection to dataloggers and controllers. Typical applications include PPFD (Photosynthetic Photon Flux Density) measurement over plant canopies in outdoor environments, greenhouses, and growth chambers, and reflected or under-canopy (transmitted) PPFD measurements in the same environments. Quantum sensors are also used to measure PAR (Photosynthetically Active Radiation)/PPFD in aquatic environments, including salt water aquariums where corals are grown.

 

FOR MORE PRODUCT INFORMATION, CHECK OUT THESE LINKS

• Product Manual

• Specification Sheet

• Technical Drawing

 

MORE INFORMATION ON APOGEE ORIGINAL QUANTUM SENSORS >> click here

Full Description
Where to Buy

The SQ-422 sensor outputs a digital signal using Modbus RTU protocol over RS-232 and RS-485. The sensor is calibrated for sunlight and electric lights, selectable through Modbus commands, and has a command that automatically applies the immersion effect correction factor for underwater measurements. The sensor features a rugged, self-cleaning sensor housing design, and high-quality cable terminating in pre-tinned pigtail leads for easy connection to dataloggers and controllers. Typical applications include PPFD (Photosynthetic Photon Flux Density) measurement over plant canopies in outdoor environments, greenhouses, and growth chambers, and reflected or under-canopy (transmitted) PPFD measurements in the same environments. Quantum sensors are also used to measure PAR (Photosynthetically Active Radiation)/PPFD in aquatic environments, including salt water aquariums where corals are grown.

 

FOR MORE PRODUCT INFORMATION, CHECK OUT THESE LINKS

• Product Manual

• Specification Sheet

• Technical Drawing

 

MORE INFORMATION ON APOGEE ORIGINAL QUANTUM SENSORS >> click here

Current Stock:
Input Voltage Requirement 5.5 to 24 V DC Average Max Current Draw RS-232 quiescent 36.87 mA, active 37.06 mA; RS-485 quiescent 37.37 mA, active 42.30 mA Calibration Uncertainty ± 5 % Measurement Repeatability Less than 1 % Long-term Drift Less than 2 % per year Non-linearity Less than 1 % (up to 4000 µmol mˉ² sˉ ¹) Field of View 180˚ Spectral Range 410 to 655 nm ( wavelengths where response is greater than 50 % fo maximum) Directional (cosine) Response ± 5 % at 75˚ zenith angle Temperature Response 0.06 ± 0.06 % per C Operating Environment -40 to 70 C; 0 to 100 % relative humidity; can be submerged in water up to depths of 30 m Dimensions 30.5 mm diameter, 37 mm height Mass (with 5 m of cable) 140 g Cable 5 m of two conductor, shielded, twisted-pair wire, additional cable available in multiples of 5 m; TPR jacket (high water resistance, high UV stability, flexibility in cold conditions); pigtail lead wires Warranty 4 years against defects in materials and workmanship