The SU-200 is an unamplified analog sensor with a voltage output. The sensor offers a low-cost option for detecting UV radiation from 300 to 400 nm and are calibrated in energy flux units of Watts per square meter. Typical applications include monitoring the filtering ability and stability of various materials, measuring UV-A radiation in outdoor environments and laboratory use, and monitoring UV radiation in horticultural operations environments. Sensor includes IP68 marine-grade stainless-steel cable connector 30 cm from head to simplify sensor removal and replacement for maintenance and recalibration.
FOR MORE PRODUCT INFORMATION, CHECK OUT THESE LINKS
MORE INFORMATION ON APOGEE ULTRAVIOLET SENSORS >> click here
Current Stock:
Power Supply
Self-Powered
Output (sensitivity)
0.1 mV per W m⁻²; 0.03 mV per µmol m⁻² s⁻¹
Calibration Factor (reciprocal of sensitivity)
10 W m⁻² per mV; 30 µmol m⁻² s⁻¹ per mV
Calibration Uncertainty
± 10 %
Output Range
0 to 10 mV
Measurement Range
0 to 100 W m⁻²
Measurement Repeatability
Less than 0.5 %
Long-term Drift
Less than 2 % per year
Non-linearity
Less than 1 %
Response Time
Less than 1 ms
Field of View
180°
Spectral Range
300 to 400 nm (wavelengths where response is greater than 10 % of maximum)
Directional (Cosine) Response
± 2 % at 45°, ± 5 % at 70°
Temperature Response
Less than 0.1 % per C
Operating Environment
-30 to 85 C; 0 to 100 % relative humidity
Dimension
30.5 mm diameter, 37 mm height
Mass
140 g (with 5 m of lead wire)
Cable
5 m of shielded, twisted-pair wire; TPR jacket (high water resistance, high UV stability, flexibility in cold conditions); pigtail lead wires; stainless steel (316), M8 connector located 25 cm from sensor head
Warranty
4 years against defects in materials and workmanship
