ST-100: Thermistor Temperature Sensor

$59.00

The ST-100 is a high accuracy thermistor (± 0.1 C from 0 to 70 C), mounted in a waterproof housing, designed for continuous measurement of air, soil, or water.

 

FOR MORE PRODUCT INFORMATION, CHECK OUT THESE LINKS

• Product Manual

• Specification Sheet

• Technical Drawing

 

MORE INFORMATION ON APOGEE TEMPERATURE SENSORS >> click here

Full Description
Where to Buy

The ST-100 is a high accuracy thermistor (± 0.1 C from 0 to 70 C), mounted in a waterproof housing, designed for continuous measurement of air, soil, or water.

 

FOR MORE PRODUCT INFORMATION, CHECK OUT THESE LINKS

• Product Manual

• Specification Sheet

• Technical Drawing

 

MORE INFORMATION ON APOGEE TEMPERATURE SENSORS >> click here

Current Stock:
Measurement Range -50 to 70 C Measurement Uncertainty 0.1 C (from 0 to 70 C), 0.2 C (from -25 to 0 C), 0.4 C (from -50 to -25 C) Measurement Repeatability Less than 0.05 C Non-stability (Long-term Drift) Less than 0.02 C per year (when used in non-condensing environments where the annual average temperature is less than 30 C; continuously high temperatures or continuously humid environments increase drift rate) Time Constant ( time for detector signal to reach 63 % following a step change) 32 s Self-Heating Less than 0.01 C (typical, assuming pulsed excitation of 2.5 V DC),; 0.08 C at 5 C (maximum, assuming continuous input excitation of 2.5 V DC) Operating Environment -50 to 70 C; 0 to 100 % relative humidity Resistance at 0 C 32651.0 Ω Input Voltage Requirement 2.5 V DC excitation Output Voltage Range 0 to 2.5 V DC (assuming input excitation of 2.5 V DC) Current Drain 0.1 mA DC at 70 C (maximum, assuming continuous input excitation of 2.5 V DC) Dimensions 100 mm length, 6 mm diameter Mass 60 g Cable 5 m of shielded, twisted-pair wire with santoprene rubber jacket (high water resistance, high UV stability, flexibility in cold conditions) Warranty 4 years against defects in materials and workmanship