The SU-100 is an un-amplified analog sensor with a voltage output. The sensor incorporates a photodiode that measures combined UVA and UVB radiation. Typical applications include UV radiation measurement in outdoor environments (sensor is not recommended for long-term continuous outdoor deployment), laboratory use with artificial light sources (e.g., germicidal lamps), and monitoring the filter ability and stability of various materials. Sensor includes IP68 marine-grade stainless-steel cable connector 30 cm from head to simplify sensor removal and replacement for maintenance and recalibration.
We are currently looking for case studies for this product. If you would like to share your application of this product, please click here.
Sensitivity0.2 mV per µmol mˉ² sˉ¹, 0.61 mV per W mˉ²Calibration Factor5.0 µmol mˉ² sˉ¹ per mV, 1.65 W mˉ² per mVCalibration Uncertainty± 10 %Measurement RepeatabilityLess than 1%Non-stability (Long-term Drift)Less than 3 % per yearNon-linearityLess than 1 % (up to 300 µmol mˉ² sˉ¹)Response TimeLess than 1 msField of View180 ˚Spectral Range250 to 400 nmDirectional (Cosine) Response± 10 % at 75 ˚ zenith angleTemperature ResponseApproximately 0.1 % per COperating Environment-40 to 70 C, 0 to 100 % relative humidityDimensions24 mm diameter, 28 mm heightMass75 g (with 5 m of lead wire)Cable5 m of shielded, twisted-pair wire with santoprene rubber jacketWarranty4 years against defects in materials and workmanship