SU-202-SS 0 to 2.5 V UV-A Sensor

$425.00

The SU-202-SS is an amplified UV-A sensor with a 0 to 2.5 V output and high-quality cable terminating in pre-tinned pigtail leads for easy connection to dataloggers and controllers. The sensor offers a low-cost option for detecting UV radiation from 300 to 400 nm and is calibrated in energy flux units of Watts per square meter. Typical applications include monitoring the filtering ability and stability of various materials, measuring UV-A radiation in outdoor environments and laboratory use, and monitoring UV radiation in horticultural operations environments. Sensor includes IP68 marine-grade stainless-steel cable connector to simplify sensor removal and replacement for maintenance and recalibration.

 

FOR MORE PRODUCT INFORMATION, CHECK OUT THESE LINKS

• Product Manual

• Specification Sheet

• Technical Drawing

 

MORE INFORMATION ON APOGEE ULTRAVIOLET SENSORS >> click here

Full Description
Where to Buy

The SU-202-SS is an amplified UV-A sensor with a 0 to 2.5 V output and high-quality cable terminating in pre-tinned pigtail leads for easy connection to dataloggers and controllers. The sensor offers a low-cost option for detecting UV radiation from 300 to 400 nm and is calibrated in energy flux units of Watts per square meter. Typical applications include monitoring the filtering ability and stability of various materials, measuring UV-A radiation in outdoor environments and laboratory use, and monitoring UV radiation in horticultural operations environments. Sensor includes IP68 marine-grade stainless-steel cable connector to simplify sensor removal and replacement for maintenance and recalibration.

 

FOR MORE PRODUCT INFORMATION, CHECK OUT THESE LINKS

• Product Manual

• Specification Sheet

• Technical Drawing

 

MORE INFORMATION ON APOGEE ULTRAVIOLET SENSORS >> click here

Current Stock:
Power Supply 3.3 to 24 V DC Output (sensitivity) 25 mV per W m⁻²; 8.33 mV per µmol m⁻² s⁻¹ Calibration Factor (reciprocal of sensitivity) 0.04 W m⁻² per mV; 0.12 µmol m⁻² s⁻¹ per mV Calibration Uncertainty ± 10 % Output Range 0 to 2.5 V Measurement Range 0 to 100 W mˉ² Measurement Repeatability Less than 0.5 % Long-term drift Less than 2 % per year Non-linearity Less than 1 % Response Time Less than 1 ms Field of View 180° Spectral Range 300 to 400 nm (wavelengths where response is greater than 10 % of maximum) Directional (Cosine) Response ± 2 % at 45°; 5 % at 75˚ Temperature Response Less than 0.1 % per C Operating Environment -40 to 70 C; 0 to 100 % relative humidity Dimensions 30.5 mm diameter, 37 mm height Mass (with 5 m of cable) 140 g Cable 5 m of shielded, twisted-pair wire; TPR jacket (high water resistance, high UV stability, flexibility in cold conditions); pigtail lead wires; stainless steel (316), M8 connector Warranty 4 years against defects in materials and workmanship